Abstract
About this talk
The process of oil displacement by polymer solutions has long been studied in the oil and gas industry. This process is quite effective, but in recent years, polymers have appeared in the industry that can significantly improve the results of oil displacement. New polymers and their solutions exhibit properties that are important for oil displacement in the nanoscale range. One such property is the manifestation of pseudoplasticity of the polymer solution, i.e., an increase in the viscosity of the solution with a decrease in the velocity of the solution in a porous oil‑saturated medium. This property of the solution ensures a reasonable rate of solution injection through the well, followed by a multiple increase in viscosity as the solution moves through the oil saturated field in the inter‑well space.
The results of laboratory studies of this solution for oil displacement have shown the possibility of increasing oil recovery by 7–8 percentage points while maintaining the same economic costs.
For field operations, an experimental site was selected at one of the oil fields in Kazakhstan, where the oil viscosity exceeded 800 mPa·s. As a result of the pilot field operations in 2019-2021, a technological result was obtained 2,180 tons of additional oil production, or more than 400 tons of additional oil extracted from a control well, which is 30 % higher than the global average.
Mathematical modeling of the oil displacement process using this polymer solution at the experimental site showed that it is the manifestation of the nanoscale properties of the polymer solution that ensures the achieved technological result, since a traditional polymer solution would not have provided the achieved technological effect.
Polymers have also appeared in the industry that, due to their special nanoscale properties of polymer molecules, do not reduce the viscosity of the solution in mineralized waters, although the polymer systems traditionally used in the industry reduce their viscosity by 4–6 times, which worsens the oil displacement results. The studies conducted make it possible to outline the directions for developing the chemical properties of the polymers used in the industry.
Speaker
About the speaker

